De-sta-co F5-B AC Inverter Drive Bedienungsanleitung PDF herunterladen (Seite 18)

X1A

N/L2

The maximum motor cable length listed in the tables in section 2.3 is based

on several factors: use of shielded motor cables, ground current limitations,

increased EMI noise levels, voltage peaks at the motor terminals.

Connect shield to the mounting

plate with maximum surface

area (use metal cable clamp)

Motor-temperature sensor is optional

(can be NC switch or PTC type sensor)

X1.B

3.3.3 Motor Connection

The maximum

motor cable

length listed in

the tables in section 2.3

is based on several

factors: use of shielded

motor cables, ground

current limitations,

increased EMI noise

levels, voltage peaks at

the motor terminals.

Terminal X1B provides connections for:

• ++, PB Braking resistor

• U, V, W Motor

• T1, T2 Temperature sensor/Switch

NOTE: The T1/T2 terminals aren’t present on the 230

VAC A-housing inverters.

Installation and Connection

A Housing:

B & D Housings:

-The PA, PB, T1, and T2 terminals aren’t present on the 230 VAC A-

Housing models.

-If terminals T1/T2 aren’t used a jumper needs to be installed between

them.

NOTE: If terminals T1/T2 aren’t used a jumper needs to be installed between them.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Keine Kommentare

De-sta-co F5-B AC Inverter Drive Bedienungsanleitung Seite 18